Used TOS

Heidenhain iTNC 530, Year 2008, X: 4.300, Y: 2.250, W-axes: 1.250, [rpm] 500, [Nm] 4.000, Tool: ISO SK 50, Table: 2.000 x 2.000, cooling system 50 l/min

Heidenhain TNC 426, Year 2001, X: 1.400, Y: 1.000, Z: 780, B-Axes, C-Axes, Tool: SK 50, Toolchanger, Tools 60, Table: 1.000 x 1.000, Pal. 2, Pal. size 1.000 x 1.000

Heidenhain iTNC 530, Year 2008, X: 5.000, Y: 3.000, Z: 1.250, W-axes: 800, [rpm] 3.000, kW 37, Tool: ISO 50, Table: 1.800 x 2.500, Int. cooling [bar], 2 ax Huron manual Orthogonal manueller Fräskopf / Orthogonal manual milling head

Heidenhain TNC 426, Year 1997, X: 3.500 (Tisch / table), Y: 2.500, Z: 1.250, W-axes: Spindelhub / Spindle travel: 800 mm, [rpm] 1.600, kW 37, Toolchanger, Tools 60, Table: 2.200 x 1.800

, Heidenhain TNC 430 M, Year 2000, X: 3.500, Y: 2.500, Z: 1.250, W-axes: 800, [rpm] 10 - 2.500ang. head; , kW 37, Toolchanger , Tools 60, Table: 1.800 x 2.200, Int. cooling [bar] 12

Heidenhain TNC 426, Year 2001, X: 3.500, Y: 2.500, Z: 1.200, W-axes: 800, Tool: ISO SK 50, Toolchanger, Tools 60, Table: 1.800 x 1.200