- Start page
- Lathe machines
- CNC - lathe machine
Used CNC - lathe machine
-
Year 1992, Osai CNC Japan service Euroweit, Expertly rebuilt: 2005 Retrofit CNC, Turnlenght 6.200 mit futter 6.100, swing 1.500, Between centers 6.200, [rpm] 4 - 800, kW 67, Tailstock position motor, cooling system, Steady rest fest
-
FANUC 18 T, Year 1998, Turnlenght 650, Ø 400, swing 370, Bar-Ø 77, [rpm] 35 - 3.500, kW 22 / 18,5, Tailstock MK 5, X: 280, Z: 680, Turrets 1, Tools 10
-
Fanuc 21 iTB, Year 2006, Turnlenght 630, Ø 400, swing 570, [rpm] 2.800, kW 26 / 22, Tailstock, X: 282, Z: 1.330, Turrets 1, Tools 10
-
Mazatrol Matrix, Year 2008, Turnlenght 650, Ø 420, swing 750, Bar-Ø 102, X: 260, Z: 605, [rpm] 3.300, Tailstock, Turrets 1, Tool: VDI 40, Tools 12
-
Mitsubishi M 720 BM, Year 2006, [h] 6.340, Turnlenght 1.298, Ø 275 / 356, swing 924, Bar-Ø 80, [rpm] 4.000, kW 18,5 / 15, Tailstock MK 5, X: 260, Z: 1.345, Turrets 1, Tools 12 (10), cooling system
-
Cycle controlled lathe, Fanuc 15 T, Year 1990, Expertly rebuilt: 1997 premium überholt, Turnlenght 2.000, Between centers 2.000, Ø 550, center hight 450, swing 920 / 960, [rpm] 8 - 1.500, kW 22, [Nm] 4290, Tailstock, cooling system, Steady rest 100 /400, deutsch / englisch
-
Cycle controlled lathe, Grundig, Year 1997, swing 920, Bar-Ø 130, center hight 450, Between centers 6.000, [rpm] 1.500, Tailstock, Steady rest Ø 500 mm
-
Sinumerik 820 T, Year 1987, Expertly rebuilt: Retrofit 1995, Turnlenght 7.000, Ø 1.200, [rpm] 5 - 410, kW 60, Axes 2, Tailstock MK 6, cooling system, Steady rest 508 - 1.240 MM., Steady rest 85 - 540 MM.
-
Fanuc 0-T, Year 06-1999, Turnlenght 1.290, Ø 445, Bar-Ø 91, [rpm] 9 - 2.500, kW 26 / 22, [Nm] 900, X: 350, Z: 1.255, Turrets 1, Tools 10, Tool: VDI 50, Tailstock, Tailstock programmierbar, Oil mist separator
Offers used CNC - lathe machine
Used machines are a very good alternative to purchasing new CNC lathes. You save investment costs, which can be plugged into other projects. Start with the setup you want to replace a defective machine or a new operation, so a used machine is a good choice. We offer CNC turning centers from different production years, which are checked and maintained. You will benefit from a variety of different machines for different uses. In addition to traditional CNC lathes we offer vertical CNC lathes and cycle-controlled lathe machines. With us you can check before buying about the exact performance of the equipment offered and bring in this way find out which model suits your work schedule.
CNC lathes are controlled automatically
Modern CNC lathes are equipped with an automatic control. You can program the machine so that it does all the work steps independently. The results are very accurate. Some machines allow you to read in drawings and sketches that have been manufactured according to CAD requirements. The CNC machine program can handle the requirements on its own. Moreover, there are lathes with which other work can be done. Thus, it is possible that performs a lathe drilling operations. In addition to CNC lathes CNC milling centers there, with which you can edit materials with a low degree of hardness, such as wood in a simple manner.
Programming is carried out in different ways
Used CNC lathes must be programmed on the individual steps. As a rule, can be carried out, the controller directly on the machine. This is an advantage because you need to connect a PC and can set up the machine independently of other control elements. Alternatively, it is possible to connect the machine with a complex computer control. In addition, you can use disks that contain appropriate codes for the program flow. Many of the offered used lathes support multiple programming styles, even if they are already an older provenience.