- Start page
- Okuma
Used Okuma
-
![Neuwertige B-Achse für Okuma Mac Turn 550 [1389227621]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Neuwertige B-Achse für Okuma Mac Turn 550 -1352214889-1.jpg "Neuwertige B-Achse für Okuma Mac Turn 550")
Year 2005, Expertly rebuilt: 2011 überholt / reconditioned mit neuer Lagerung, B-Axes 1 Grad, [rpm] 6000
-
OSP-P300S, Year 2012, [h] 5.150 (NC-Einschaltzeit / NC switch-on time), Turnlenght 750, Ø 600, C-Axes, [rpm] 5.000, X: 500, Y: [+/-] 160, Z: 800, Subspindle, [rpm] 5.000, Tilting Spindel, [rpm] 12.000, kW 11, Tool: HSK 63, B-Axes 225°, Toolchanger, Tools 40, cooling system mit Filter / with filter, Bar loader magazine Irco Breuning ILS-MUK 7016, L 1.650 mm
-
![Okuma LH 1250 x 5000 [1360097989]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_LH_1250_x_5000-1525366318-1.jpg "Okuma LH 1250 x 5000")
Okuma, Year 1995, swing 1.250, center hight 625, Turrets Auto-Indexierrevolver / Auto Indexing Turret, Steady rest 2 x 3 Punkt-Lünette / 2 x 3 Point Steady
-
![Okuma LU 15 M BB [268299409]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_LU_15_M_BB-1517330216-1.jpg "Okuma LU 15 M BB")
OSP 7000 L, Year 1997, Turnlenght 250, Ø 150 / 340, C-Axes 0,001°, [rpm] 38 - 3.800 Big Bore, kW 22 / 15, Subspindle, X: 260 / 640, Z: 640 / 615, Turrets 2, Tool: VDI 40, Tools 12 + 8, driv. Tools 12 (oberer Revolver / upper turret), [Nm] 23,5
-
, OSP 7000L, Year 1996, Ø 150 / 270,swing 530, Bar-Ø 52, C-Axes 0,001°, [rpm] 45 - 4.500, kW 22 / 15, Subspindle , [rpm] 50 - 4.500, kW 7,5 / 5,5, Bar-Ø 42, X: 260 / 640, Z: 140 / 615, Turrets 2, Tool: VDI 40, Tools 12 + 8, driv. Tools 12 (oberer Revolver / upper turret), [Nm] 23,5
-
![Okuma LVT 300 M [1841673719]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_LVT_300_M-1536075268-1.jpg "Okuma LVT 300 M")
Vertical Lathe , OSP-U100L, Year 2005, Ø 280, C-Axes , [rpm] 4.000, X: 210, Z: 354, Turrets 1, Tool: VDI 40, Tools 12, driv. Tools
-
, OSP P-200M, Year 2008, X: 1.000, Y: 900, Z: 1.000, [rpm] 12.000, [kW] 37 / 26, Tool: SK 50, Toolchanger , Tools 200, Pal. 10, Pal. size 630 x 630, Int. cooling [bar] 70 bar max. (7 Stufen / 7 steps)
-
![Okuma MB 400 H [1320688625]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_MB_400_H-1516283217-1.jpg "Okuma MB 400 H")
Okuma OSP 200 M, Year 2012, X: 560, Y: 610, Z: 625, [rpm] 50 - 15.000, [kW] 15, Tool: BT 40, Toolchanger, Tools 48, Pal. 2, Table: 400 x 400, table indec 0,001°, Int. cooling [bar], cooling system
-
![Okuma MB 46 VAE [522287076]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma MB 46 VAE-1473343031-1.jpg "Okuma MB 46 VAE")
Okuma OSP-200, Year 2008, [h] 1.500, X: 762, Y: 460, Z: 460, [rpm] 15.000, Tool: BT 40, Toolchanger, Tools 32, Table: 1.000 x 460, Int. cooling [bar]
-
![Okuma MB 5000 H [1653126152]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_MB_5000_H-1538480149-1.jpg "Okuma MB 5000 H")
, OSP P200MA, Year 2011, X: 760, Y: 760, Z: 760, 4. Axis , [rpm] 10 - 15.000, [kW] 26 / 18,5, Tool: BT 40, Toolchanger , Tools 146, Pal. 2, Pal. size 500 x 500, table indec 0,001° (360°), Int. cooling [bar]
-
![Okuma MC 400 H [424133006]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_MC_400_H-1533817780-1.jpg "Okuma MC 400 H")
OSP 5020 M, Year 1991, X: 560, Y: 460, Z: 510, [rpm] 45 - 7.000, Tool: ISO 40, Toolchanger, Tools 32, NC rotary table, Table: 400 x 400, Int. cooling [bar], cooling system
-
![Okuma MU 1000 H [749483240]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_MU_10000_H-1532440601-1.jpg "Okuma MU 1000 H")
OSP P300M-H, Year 2015, X: 1.550, Y: 1.600, Z: 1.650, A-Axes +25 / -115° (0,001°), B-Axes 360° (0,001°), C-Axes, Axes 5, [rpm] 10 - 4.500, kW 40 / 30, [Nm] 1.920 / 1.440, Tool: HSK 100, Toolchanger, Tools 177 Matrix, NC-panning and rotary Table, Pal. 2, Pal. size 1.000 x 1.000, Int. cooling [bar], Pal. 4 zusätzliche Paletten / 4 additional pallets
-
![Okuma Multus B 200 WX 750 [815137972]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_Multus_B_200_WX_750-1527763222-1.jpg "Okuma Multus B 200 WX 750")
Okuma OSP 700 L, Year 2011, Turnlenght 750, Ø 600, C-Axes, [rpm] 50 - 6.000, kW 11, Y: [+/-] 160 (+/- 80), Subspindle, Tilting Spindel, Tool: HSK 63, B-Axes -30 / +195°, Toolchanger, Tools 40
-
![Okuma Multus B 400 [1557233423]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_Multus_B_400-1535460240-1.jpg "Okuma Multus B 400")
, Okuma OSP-P200L, Year 2008, Turnlenght max. 1.500, Ø 710, C-Axes 0,001 °, [rpm] 2.800, kW 30 / 22, X: 925, Y: [+/-] 230, Z: 1.500, Tailstock NC-gesteuert / NC-controlled, Tilting Spindel , [rpm] 6.000, kW 14 / 10, Tool: Capto C6, B-Axes 0,001 °, Int. cooling [bar]
-
, OSP P 200 L, Year 2007, Turnlenght 1.500, Ø 710, C-Axes 360°, [rpm] 38 - 3.800, kW 22 / 15, X: 690, Y: [+/-] 230 +/– 115, Z: 1.545, W-axes: 1.550, Subspindle , [rpm] 38 - 3.800, kW 22 / 15, Tilting Spindel , [rpm] 10.000, kW 11 / 7,5 / 5,5, Tool: HSK 63, B-Axes 210° (1° indexing), Toolchanger , Tools 40
![Okuma B 200 II - W 750 [830028926]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_B_200_II_-_W_750-1541698347-1.jpg "Okuma B 200 II - W 750")
![Okuma LU 15 MW [903108433]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_LU_15_MW-1539880697-1.jpg "Okuma LU 15 MW")
![Okuma MA 600 HB [1810215764]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_MA_600_HB-1539865061-1.jpg "Okuma MA 600 HB")
![Okuma Multus B 400 W [322829487]](https://www.cnc-stenzel.com/img-cut_to_fit-320x240/Okuma_Multus_B_400_W-1541510255-1.jpg "Okuma Multus B 400 W")
Used machines
- Okuma Machining Center, Milling machines (6)
- Bed milling machine, Boringmills (0)
- Okuma Lathe machines (10)
- Swiss type (0)
- CNC Multi-Spindle machines (0)
- Measuring Machines (0)
- Grinders (0)
- EDM machine (0)
- Gear machines (0)
- Other machines (0)
- Sheet metal working (0)
- Deep hole drilling machines (0)
- Robots (0)
Offers used Okuma
By opting for used Okuma machines you save money without compromising on functionality and high quality. Here you will find a wide range of used machines from different years of construction Okuma, and for different applications and claims. Select directly by make or give the type of model in order to find it for you relevant Okuma used machines in the direct search. Optionally, you can instruct our service and rely on an uncomplicated delivery, installation and installation of your new machine.
Technical advice from specialists for used Okuma machines
The wide variety of offerings, it is not always easy to decide directly for a particular machine. We can advise you on about to be found in our models to the different types that you can see and clarify used machines in our assortment for Okuma. We are happy to present at the visit and check with you the quality of Okuma Used machines locally offered. In the data sheets of the deals you can find all important facts and information on the machine, can check maintenance intervals, for example, the last major overhaul was carried out. Buy high-quality used machines Okuma and avoid it, to decide on the proverbial pig in a poke. Through many years of experience in selling and dealing with machines manufactured by Okuma we offer you the best advice and a basis on which you make informed and quality decision at a fair price.
Contact for buyers and sellers
Would you like to sell an Okuma machine and promptly find a buyer for your car, we take on your behalf the mediation and offer your used machine on our website. Customers can book our optional service package and decide on the purchase and sale of machinery for a comprehensive service, the best advice and uncomplicated delivery at the site.