Used Nakamura - Tome

Used machine, Turning / Millingcen , Fanuc 18i-T, Year 2001, Turnlenght 305, Ø 220, C-Axes , Turrets 1, Tools 12, driv. Tools 12

Used machine, Turning / Millingcen , Fanuc 16 I-TB, Year 26.08.2008, Turnlenght 205 (oberer Revolver) / 640 (unterer Revolver), Ø 170, [rpm] 5.000, kW 15/11, Bar-Ø 65, Subspindle , kW 11/7,5, Bar-Ø 65, Axes 13, X: X1X2X3 167,5, Z: Z1Z2Z3 250/250/685, B-Axes 760, Y: [+/-] Y1Y2 +61/-41, Turrets 3, Tools 3 x 24, Tool: NT-Block, kW 5.5/3.7, Int. cooling [bar] Brinkmann 3x je Revolver/each turret

Used machine, Lathe , Fanuc, Year 1999, Turnlenght 200, Ø 178,swing 300, Bar-Ø 50, [rpm] 3.000, kW 7,5, Turrets 1, Tools 8

Used machine, Turning / Millingcen , Mitsubishi, Year 2000, Turnlenght 190, Ø 270, [rpm] 5.000, kW 15/11, Subspindle , X: X1 195, Z: Z1, X: , Z: Z2 (B) 780, C-Axes 2x, Turrets 2, Tools 2 x 12, driv. Tools 2 x 12, kW 3,7/2,2cooling system , gantry loader , gantry loader Nakamura GR 203, X: 765, Z: 2.310, kW 0,4

Used machine, Turning / Millingcen , Fanuc 18, Year 1999, Turnlenght 192, Ø 215, C-Axes , [rpm] 50 - 5.000, Subspindle , X: 195 / 195, Z: 265 / 780, Turrets 2, Tools 12 + 12, driv. Tools 12cooling system , Bar loader magazine FMB TURBO 3000 / 1700 LMS

Used machine, Lathe , Fanuc 18 TC, Year 2000, Turnlenght 250, Ø 195, [rpm] 4.500, C-Axes 360° 0,001°, Bar-Ø 51, Subspindle , [rpm] 4.500, kW 15/11, Y: 80, Turrets 2, Tools 12, driv. Tools cooling system , gantry loader Nakamura GR 210

conventional lathe , Fanuc 16i/T, Year 2001, Turnlenght 1.550 (obere WZG-Spindel / upper tool spindle), Turnlenght 500 (Revolver unten links und rechts / Revolver bottom left and right), Ø 570 (obere WZG-Spindel / upper tool spindle), Ø 400 (Revolver-unten links und rechts / Revolver down left and right), Ø 300 (Std.), X: 400, Z: 1.550 / 550, Turrets 2

Used machine, Turning / Millingcen , Fanuc 18 iTB / Manual Guide, Year 2007, Turnlenght 620, Ø 190, C-Axes , [rpm] 5.000, kW 18,5, Subspindle , [rpm] 5.000, kW 15, Y: [+/-] 45, B-Axes +/- 91° (oberer Revolver / upper turret), Turrets 2, Tools 12 + 12 (24 + 24), driv. Tools beide mit angetriebenen Werkzeugstationen / both with driven tool stationscooling system Luft- und Kühlmittelspülung d.d. rechte Spindel / Air and coolant flushing of the right spindle, Bar loader magazine IRCO ILS-RBK Kurzlader - 1,2 m

Used machine, Turning / Millingcen , Fanuc 31i A (3 Kanalsteuerung / 3 channel control), Year 2010, Turnlenght 588, Ø 175, Bar-Ø 65, C-Axes , [rpm] 4.500, kW 11 / 7,5, Subspindle , [rpm] 4.500, kW 11 / 7,5, C-Axes , Y: [+/-] 31 (an allen Revolvern / all revolvers), Turrets 3, Tools 12 + 12 + 12, driv. Tools 12 + 12 + 12, Bar loader magazine IEMCA Master 865 MP, 3 m