Used _others

Fanuc 21 iTB, Year 2006, Between centers 300, Turnlenght 250, Ø 160, swing 250, C-Axes, [rpm] 6.000, Tailstock, Turrets 1, Tool: VDI 20, Tools 12, driv. Tools, cooling system

, Fanuc 16i, Year 2000, X: 220, Y: 120, Z: 170, Axes 3, [rpm] 20.000, [kW] 3,4 / 1,5, Tool: 16 SK, Toolchanger , Tools 20, Table: 350 x 140

Siemens 840 D, Year 2000, X: 2.500 / 2 x 800 Pendelbewegung / movement by pendulum, Y: 500, Z: 610, [rpm] 5.330, [kW] 38 / 16,5, [Nm] 280, Tool: SK 40, Toolchanger, Tools 40, Table: 2.640 x 560, Table: 1500/1120 x 560 (Pendel / Pendulum), cooling system Knoll, Oil mist separator Elbaron

Siemens 840D + Shop Mill + PCU 50, Year 2005, X: 2.500 / 2 x 800 Pendelbewegung / movement by pendulum, Y: 500, Z: 970, [rpm] 5.300, [kW] 38 / 16,5, [Nm] 280, Tool: SK 40, Toolchanger, Tools 40, Table: 2,640 x 560, Int. cooling [bar] 35 l /50 bar, Oil mist separator Elbaron

, Siemens Sinumerik 802 D, Year 1987, Expertly rebuilt: 2004, Turnlenght 6.000,swing 2.000, [rpm] 40 - 3.000, Steady rest 2 x

conventional lathe Karusseldrehmaschine / carousel lathe, konventionell, Year 1983, Ø 6.300, swing 6.300, turning hight 2.500, [rpm] 0,8 - 80, Z: 1.600 Querbalkenzuport

, Fidia C 20, Year 1991, Expertly rebuilt: 2001, X: 2.400, Y: 1.700, Z: 1.200, A-Axes -100° / 100°, B-Axes 360°, C-Axes -360° / 360°, Axes 6, [rpm] 25 - 4.200, kW 30, Tool: ISO SK 50, Table: 1.800 x 1.200

MITSUBISHI MELDAS M 635 LC, Year 1998, Turnlenght 80, Ø 32, Bar-Ø 32, C-Axes 0,001°, [rpm] 80 - 8.000, kW 5,5 / 3,7, Subspindle, [rpm] 60 - 6.000, X: 130, Z: 200 /400, Turrets 1, Tool: VDI 20 DIN 69880, Tools 12, driv. Tools, cooling system

Heidenhain iTNC 530, Year 2006, X: 420, Y: 320, Z: 320, A-Axes 360, B-Axes +/-100, Axes 5, [rpm] 30.000, kW 30, Tool: ISO V 30, Toolchanger, Tools 60, NC-panning and rotary Table, Table: Ø 250

Vertical Lathe Karusselldrehmaschine - Einständer / Vertical vertical lathe - single column, Siemens Sinumerik 840 DSL, Year unbekannt / unknown, Expertly rebuilt: 2018, swing 6.300, [rpm] 0,8 - 80, kW 92, [Nm] 130.000, X: 2.200, Z: 1.600, X: 1.600, Z: 1.900

Heidenhain TNC 415, Year 1995, X: 3.100, Y: 1.500, Z: 1.500, W-axes: Spindelhub / Spindle travel: 500 mm, [rpm] 12 - 2.000, 2 ax Huron auto, Tool: ISO 50, Toolchanger, Tools 40, Table: 1.700 x 1.100

Heidenhain TNC 425, Year 1995, X: 2.600, Y: 2.000, Z: 1.500, W-axes: Spindelhub / Spindle travel: 500 mm, [rpm] 0 - 2.000, Tool: ISO 50, Toolchanger, Tools 40, Table: 1.100 x 1.700

, Siemens Sinumerik 840 D, Year 2004, Between centers 2.900, center hight 250,grinding-Ø[mm] 500,grinding length [mm] 2.900,wheel (S1L + S2L) 500 x 100 x 203 (Außenschleifen / external grinding), [rpm] 151 - 4.500, [kW] 3,1 / 0,1, Tailstock , B-Axes + 135 -90° 0,001°, C-Axes 0.001°, [rpm] 25 - 45 m/s, kW 2.560 / 1.536cooling system Knoll VRF - Option, Steady rest offen/open 10 - 140, 100 - 180 mm, Steady rest geschlossen/closed 10 - 130, 130 - 230, 230 - 330 mm

Year 1999, Between centers 750, center hight 125, swing 250, [rpm] 710, [rpm] 2140 / 2640 (Drehzahl Schleifspindel / spindle speed), [kW] 9,4, Tailstock, Table Speed[mm/min] 0,05 - 5