Printable view
| CNC Turning / Millingcenter | |
| Machine type: | Mori Seiki NZ 1500 T2Y2 |
| Control: | MSX 701 III Mapps III |
| Year: | 2008 |
| Power on time: [h] | 24.000 |
| Spindle running time: [h] | 9.800 |
| Available after: | sofort / now |
Specifications
| Max. turning length: [mm] | 1.130 / 810 |
| Turningdiameter: [mm] | 200 |
| Max. swing over slide: [mm] | 320 |
| Spindle bore: [mm] | 61 |
| Bar capacity: [mm] | 52 |
| Spindle nose: | A 2 - 5 |
| C-Axis | 0,001° |
| Rotational speed: [rpm] | 6.000 |
| Input power: [kW] | 22 / 18 |
| Subspindle | |
| Rotational speed: [rpm] | 6.000 |
| Input power: [kW] | 22 / 18 |
| C-Axis | 0,001° |
| Travel: | |
| X-Axis: [mm] | 210 |
| Y-Axis: [+/- mm] | + 65 / - 45 |
| Z-Axis: [mm] | 810 |
| Rapid motion: (X/Z) [m/min] | 30 / 50 |
| Amount of turrets: | 2 |
| Tool capacity: | 16 + 16 |
| Driven Tools | |
| revolution driven tools | 6.000 |
| drive power driven tools [kW]: | 7,5 / 5,5 |
| Power consumption: [KW] | 83 kVA |
| Machine weight: [kg] | 8.300 |
| Req. space (LxBxH): [m] | 3,95 x 2,73 x 2,33 |
Equipment
| Internal cooling: [bar] | 20 |
| Chip conveyor | |
| Partscatcher | |
| Collets | Kitagawa 6 |
| 3-jaw chuck [mm] |
Images
Stenzel Service
- Dismantling of your puchased machine on site,Securing and loading your machine.
-
Organisation of transport insurance and permits,Unloading and transfer of the machine into your production hall
-
Setup and installation by specialized service technicians,Organisation of trainings