Lathe machine Mazak Integrex 300 III ST + gentry

CNC Milling / Turningcenter
Machine type: Mazak Integrex 300 III ST + gentry
Control: Mazatrol Fusion 640 MT Pro
Installation: 2004
Id 14003
  Add to Favorites

Used CNC Milling / Turningcenter Mazak Integrex 300 III ST + gentry

Max. swing over bed: [mm]850
Max. swing over slide: [mm]850
Between centers: [mm]1.524
Bar capacity: [mm]77
Main Spindle
Rotational speed: [rpm]35 - 4.000
Input power: [kW]26
Torque: [Nm]600
Spindle bore: [mm]88
Spindle nose:A2-8
Rotational speed: [rpm]35 - 4.000
Spindle bore: [mm]88
Spindle nose:A2-8
Input power: [kW]26
CNC-Spindle tilting for cutting and turningopertations
Rotational speed: [rpm]15 - 12.000
Tool:Capto C6
Tool capacity:40
Lower revolver
Amount of tools: [pieces]9
X-Axis: [mm]630
Y-Axis: [mm]230
Z-Axis: [mm]1.585
W-axes: [mm]1.530
 X2: 230 mm
 Z2: 1.530
Req. space (LxBxH): [m]11,510 x 3,476 x 3,505
Machine weight: [kg]15.000
Gantry loaderGL 200 F
Palett systemS-Loop type
Amount of paletts:12
 Max. Teilegewicht 2 x 20 kg
Tool diameter: [mm]ø 50 - 300 mm
Workpiece thickness: [mm]150 mm
Internal cooling: [bar]
3-jaw chuck [mm]2 x Kitagawa B 210A0815X
B-Axesindex 5° Coupling clamp - 0,0001° incr. N/A Contouring
Software:und Optionen:
 CS 173 Turret air blast
 SI 095 2nd spindle C-axis, 0,0001° incement
 AT 345 40 Capto-tool magazine
 AS 080 Overload detection system
 CS 255 Shower coolant 2,7 bar, 60 Ltr. First spindle
 CS 504 15 KG Thru/Flood coolant
 AS 090 Automatic power on/off and warm up
 PL 023 Signal tower (operation end : Yellow)
 BF 009 Barfeeder interface kit (LNS QLS)
 CV 350 Chip conveyor (side, Consep) 1500U
 MO 320 Hobbing
 NO 072 Auto Pecking cycle with load detection
 NO 391 Additional M Code set ( 2 M-code)
 NO 601 Cylindrical Interpolation commang (G07)
 NP 310 Simultaneous 5 Axis Package
 Mist collector

  Add to Favorites
Recommend this page: