Used Lathe machines

MAPPS 3, Year 2006, [h] 21.799, Turnlenght 1.542, Ø 660, Ø 350 (Revolver 2), swing 730, Bar-Ø 80 / 80, C-Axes, [rpm] 4.000, kW 22 / 18,5, X: 750 / 195 (Revolver 2), Y: [+/-] 210, Z: 1.550 + 100mm (für ATC) / 1.525 (Revolver 2), Subspindle, Tilting Spindel, [rpm] 12.000, kW 18,5 / 11, Tool: Capto C 6, B-Axes +/- 120°; Indexierung: 1°, Toolchanger, Tools 40, driv. Tools

M730BM MAPPS IV, Year 2013, [h] 10.522, Turnlenght 600, Ø 370, swing 780, Bar-Ø 80, [rpm] 4.000, kW 26 / 22, X: 225 / 170, Z: 650 / 650, Turrets 2, Tools 1 x 12 / 1 x 8, Tool: BMT 60, Tailstock MK 4

Fanuc MSG-501, Year 1998, Turnlenght 1.000, Ø 710, Between centers 850, Bar-Ø 60, [rpm] 42 - 2.400, X: 345, Z: 955, Tailstock, Turrets 1, Tools 12, cooling system Hochdruck

Fanuc 16i-TB, Year 2007, Turnlenght 1.100, Ø 370 mm, Bar-Ø 65, C-Axes, [rpm] 4.500, kW 22 / 18,5, Y: [+/-] 160, Subspindle, [rpm] 4.500, kW 22 / 18,5, Tilting Spindel, [rpm] 12.000, kW 18,5 / 11, Tool: Capto C6, B-Axes 230° (servogesteuert / servo controlled ), Toolchanger, Tools 40, Ø 300, Tools 12 / 24, driv. Tools 12 / 24

Fanuc 18i-T, Year 2003, Turnlenght 400, Ø 195, swing 190, C-Axes, [rpm] 5.000, [kW] 15 / 11, Subspindle, [kW] 11 / 7,5, X: 157 / 167, Y: +/- 35, Z: 465, Bar-Ø 51, Turrets 2, Tools 12 / 12, driv. Tools, Bar loader magazine FMB Turbo 10-65, 3m

Sinumerik 820 T, Year 1987, Expertly rebuilt: Retrofit 1995, Turnlenght 7.000, Ø 1.200, [rpm] 5 - 410, kW 60, Axes 2, Tailstock MK 6, cooling system, Steady rest 508 - 1.240 MM., Steady rest 85 - 540 MM.

Traub TX 8i, Year 2006, Bar-Ø 65, C-Axes, [rpm] 5.000, kW 17 / 22,6, X: 340 / 175 (Revolver unten), Y: [+/-] 40, Z: 650, Subspindle, Tilting Spindel, [rpm] 8.000, B-Axes + / - 95°, Tools 10, driv. Tools, cooling system

Siemens 880 T, Year 1993, Turnlenght 1.600, Ø 540, swing 540, C-Axes, [rpm] 4.000, kW 37, Tailstock, Y: [+/-], Axes 5, Turrets 1, Tool: SK 40 DIN 69871, Tools 12, Toolchanger, Tools 24

Cycle controlled lathe, Weiler D2, Year 2003, Turnlenght 2.000, Ø 810, swing 510, [rpm] 1 - 1.120, [Nm] 3.500, Tailstock MK 6

Cycle controlled lathe, Weiler D3, Year 2006, Turnlenght 2.000, Ø 810, [rpm] 1 - 1.800, [Nm] 3.500, Tailstock MK 6, Steady rest Ø ca. 80 bis 400mm