Used DMG

Siemens Ergoline 840 D SL / ShopTurn, Year 2013, [h] 6.200, Between centers 805, Turnlenght 650, Ø 350, swing 385, C-Axes, [rpm] 4.500, Tailstock, X: 255, Y: [+/-] 255, Z: 800, Turrets 1, Tool: VDI 30, Tools 12, driv. Tools

Siemens, Year 2000, Ø 200, swing 240, Bar-Ø 42, C-Axes, [rpm] 31 - 6.300, kW 18 / 14, [Nm] 173 / 130, Subspindle, [rpm] 31 / 6.300, kW 18 / 14, Bar-Ø 42, X: 190, Y: [+/-] 40, Z: 555 / 555 / 600, Turrets 2, Tools 12 + 12, driv. Tools 12 + 12, cooling system 6 bar, 50 l/min

MSX 711 Mapps IV (Fanuc F31iB5), Year 2015, Turnlenght 424, Ø 370, swing 730, Bar-Ø 65, C-Axes 0,001°, [rpm] 5.000, kW 11 / 7,5, [Nm] 223 / 158, X: 380 / 155, Y: [+/-] 210, Z: 460 (+ 155) / 610, Subspindle, [rpm] 6.000, kW 7,5 / 5,5, C-Axes 0,001°, Tilting Spindel, [rpm] 12.000, kW 9 / 5,5, [Nm] 120 / 44, Tool: Capto C5, Coromant, B-Axes +/- 120° (0,001°), Toolchanger, Tools 38, Tools 10, driv. Tools 10, cooling system, Int. cooling [bar] 70 bar, SEI International, Oil mist separator, Bar loader magazine TOP Automazioni X-Files S 365 P

Siemens 840D solutionline Operate / 3 D, Year 2012, X: 560, Y: 560, Z: 660, [rpm] 12.000, [kW] 15 / 11, Tool: SK 40 / HSK 63, Tools 40, Pal. 2, Pal. size 400 x 400, Int. cooling [bar] 40, cooling system Blasluft durch Spindelmitte, anwählbar über M-Funktion / Blowing air through spindle center, selectable via M function

, Mitsubishi M730UM - Celos, Year 2017, Turnlenght 700, Ø 360, Bar-Ø 80, C-Axes 0,001°, [rpm] 4.000, kW 18,5, Subspindle mit Reitstockfunktion / with tailstock function, [rpm] 4.500, kW 11, Bar-Ø 41, C-Axes 0,001°, X: 260, Y: [+/-] 100, Z: 795, Turrets 1, Tool: BMT 60, Tools 12, driv. Tools cooling system 5 bar

, Siemens 840 Dsl -Operate, Year 2012, Turnlenght 450, Ø 370, Bar-Ø 65, C-Axes 0,001°, [rpm] 5.500, kW 11, [Nm] 223, X: 380, Y: [+/-] 210 (+/- 105), Z: 460, Subspindle , [rpm] 6.000, kW 7,5, C-Axes 0,001°, Tilting Spindel , [rpm] 20.000, kW 7,5, [Nm] 30, Tool: Capto C5, B-Axes 240° (+/- 120°), Toolchanger , Tools 38, Int. cooling [bar] 80Oil mist separator

, MSX 711 CELOS (Fanuc 31 IA), Year 2014, Turnlenght 810, Ø 200 / 320 max.,swing 800, Bar-Ø 65, C-Axes 0,001°, [rpm] 5.000, kW 25 / 22, Subspindle , [rpm] 5.000, kW 25 / 22, C-Axes 0,001°, X: 210 / 210 / 210, Y: [+/-] 110 (+65/-45) / 110 (+45/-65) / 110 (+65/-45), Z: 280 / 280 / 820, B-Axes 870 mm, Turrets 3, Tools 16 + 16 + 16, driv. Tools 16 + 16 + 16, Int. cooling [bar] 50cooling system , Bar loader magazine Iemca Master 870 UP

Siemens 840 D powerline / 3D, Year 2007, X: 500, Y: 450, Z: 400, B-Axes +110 / -5°, C-Axes, Axes 5, [rpm] 10.000, Tool: HSK 63, Toolchanger, Tools 16, NC-panning and rotary Table, Table: 630 x 500, Int. cooling [bar]

, Siemens 840D, Year 2003, Ø 390 (610),swing 610, Bar-Ø 102, C-Axes 0,025°, [rpm] 20 - 3.200, kW 74 / 45, [Nm] 1.080 / 650, X: 605 / 267, Y: [+/-] 210, Z: 1.870 / 1.840 (Z2 + Z3), Subspindle , [rpm] 20 - 3.200, kW 74 / 45, [Nm] 1.080 / 650, Bar-Ø 102, C-Axes 0,025°, Tilting Spindel , [rpm] 12.000, kW 15 / 10, [Nm] 130 / 37, Tool: Capto C5, B-Axes 240 ° (+/- 120°), Toolchanger 2 x Kettenmagazin / 2 x Chain magazine, Tools 80 ( 40 + 40), Tools 12, driv. Tools , [Nm] 33cooling system Oil mist separator , gantry loader Paletten-Ovalband / Pallet oval belt, Pal. 20

, Siemens 840 D, Year 2003, [h] 34.376, Turnlenght 635, Ø 120,swing 250, Bar-Ø 62 / 65, C-Axes , [rpm] 5.000, kW 35 / 25, [Nm] 370 / 270, Subspindle , [rpm] 5.000, kW 26 / 21, [Nm] 290 / 230, C-Axes , X: 300 / 180 / 175, Y: [+/-] 40, Z: 650 / 650 / 670, B-Axes (oberer Revolver / upper turret), Turrets 2, Tool: VDI 30, Tools 12 + 12, driv. Tools 12 + 12cooling system 6 bar, 20 l/min

Siemens Sinumerik 840D powerline, Year 2008, Bar-Ø 90, C-Axes, [rpm] 20 - 3.200, kW 34, [Nm] 495, [rpm] 20 - 5.000, kW 20, [Nm] 213, C-Axes, Subspindle mit Reitstockfunktion / with tailstock function, Y: [+/-], Turrets 2, Tools 12 + 12, driv. Tools, cooling system 8 / 20 bar l/min // 8 / 40 bar l/min, Oil mist separator IFS, Typ IFE (2000 m 3 /h), Bar loader magazine IRCO, ILS-RBK 100/16, 1.200 mm